Advanced UV Cured Aircraft and Marine Finishes

BluSky Armor™ Clear Coatings

Below you can browse the Safety Data Sheet (SDS) and Technical Data Sheet (TDS) for each product in the BluSky Armor™ family of cleat coating products.

BluSky Armor™ 1027-U high-performance clear coat is a very fast drying UV-cured cabinet finish that complies with 14CFR25.853 for 60-second vertical burn, smoke density and toxic gas emission. The cross-linked polymer chemistry of BluSky Armor™ gives it superior resistance to abrasion and solvents, and offers excellent tensile strength and hardness. It has exceptional finish adhesion to wood and wood veneer, composites and painted surfaces, offers much-desired flexibility properties and is highly resistant to yellowing, shattering and cracking.

The fast cure times allow the user to accelerate the completion of cabinet finishing projects, leading to quicker returns to service of aircraft and increased profits for both the finishing shop and the aircraft operator.

BluSky Armor™ 1007 Gloss

1007 is a gloss clear sprayable flame-resistant topcoat with medium viscosity and high hardness. It is best used as a sealer and top coat for wood and synthetic substrates that have NOT already been stained or coated.

BluSky Armor™ 1007-U Gloss

1007-U is a gloss clear sprayable flame-resistant topcoat with medium viscosity and high hardness. It is best used as a sealer and top coat for wood and synthetic substrates, particularly those that HAVE already been stained or coated.

BluSky Armor™ 1007-U Satin or Matte

1007-S or 1007-M is a clear sprayable flame-resistant topcoat with medium viscosity and high hardness available in either Satin or Matte finish. It is best used as a top coat for wood and synthetic substrates that HAVE already been coated with a seal coat and/or base coat of BluSky Armor™.

BluSky Armor™ 1027 Gloss

1027 is a gloss clear sprayable flame-resistant topcoat with low viscosity and excellent abrasion-resistance. It is best used as a sealer and top coat for wood and synthetic substrates that have NOT already been stained or coated.

BluSky Armor™ 1027-U Gloss

1027-U is a gloss clear sprayable flame-resistant topcoat with low viscosity and excellent abrasion-resistance. It is best used as a sealer and top coat for wood and synthetic substrates, particularly those that HAVE already been stained or coated.

BluSky Armor™1027-U Satin or Matte

1027-S or 1027-M is a clear sprayable flame-resistant topcoat with low viscosity and excellent abrasion-resistance available in either Satin or Matte finish. It is best used as a top coat for wood and synthetic substrates, that HAVE already been coated with a seal coat and/or base coat of BluSky Armor™.

BluSky Armor™1057 Gloss

1057 is a gloss clear flame-resistant topcoat with medium viscosity and excellent abrasion-resistance that can be sprayed or applied with a roller. It is best used as a fast build clear coat for wood and synthetic substrates that have already been sealed with BluSky Armor™ 1007 or 1027 clear.

BluSky Armor™1057-U Gloss

1057-U is a gloss clear flame-resistant topcoat with low viscosity and excellent abrasion-resistance that can be sprayed or applied with a roller. It is best used as a fast build clear coat for wood and synthetic substrates that have already been sealed with BluSky Armor™ 1007 or 1027 clear.

BluSky Armor™1057-U Satin or Matte

1027-S or 1027-M is a clear flame-resistant topcoat with low viscosity and excellent abrasion-resistance available in either Satin or Matte finish that can be sprayed or applied with a roller. It is best used as a fast build clear coat for wood and synthetic substrates that have already been sealed with BluSky Armor™ 1007 or 1027 clear.

BluSky Armor™1047 Knife Grade Filler

1027-S or 1027-M is a UV-curable filler paste that easily cures tack-free in less than 30 seconds. It is used as a filler for deep chips, gouges and other deep repairs or surface voids. This paste will not flow or move, so it can be cured in the exact orientation that the user desires.

BluSky Armor™1067 Laminating Resin

1067 is a UV-curable laminating resin that cures tack free. The product contains no VOCs and is intended for use as a building lacquer for fiberglass lamination build-ups.

BluSky Armor™ TruCut Intermediate Polishing Compound

TruCut 1 is a VOC-free, water based mineral compounding system that easily removes sanding scratches, debris, and other imperfections producing a brilliant scratch free finish.

BluSky Armor™ TruCut Finishing Top Coat Polish Compound #2

TruCut #2 is a VOC-free, water based mineral compounding system that removes micro scratches, polishing swirls and haze, producing a brilliant mirror-like finish to BluSku Armor™ coated veneers and synthetic finishes.